TRIGGER 4 PLUS Wireless Accessory Control System COMBO KIT – Jeep JL+JT
$356.93
For 2018+ Jeep JL and JT
Includes Free Shipping!
In stock
Description
TRIGGER 4 PLUS Jeep JL-JT Combo Kit
*Does not work with JL 3Ltr Eco Diesel*
The TRIGGER 4 PLUS Jeep JL-JT Combo Kit pairs our critically acclaimed Trigger 4 Plus Wireless Controller with two essential installation accessories: Our Wheel-Well Controller Mounting Bracket and the Overhead RF Remote Mount!
Please note: the Overhead remote mount will NOT fit on vehicles equipped with the Adaptive Cruise Control option.
Also fits 2020+ JT Gladiator!
The Trigger 4 PLUS Wireless Accessory Controller
Save installation time of your electronic accessories! Eliminate the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. The Trigger 4 PLUS adds functionality such as an RF remote control for activating installed accessories from outside the vehicle. In addition, fused circuits with LED indicators notify you of circuit status or blown fuses.
The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. There is an ambient back-light (illuminating the space around the switches momentarily) and it can be re-programmed for security or use with additional remotes; Several Trigger 4 Plus Wireless Accessory Controllers can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to flip a switch on the remote.
We get asked this a lot, so…Please do not swap higher capacity fuses into lower capacity circuits. Each circuit is engineered to handle only the stated load, and doing so will damage the Trigger and void its warranty.
The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to “Trigger” lights from outside the vehicle whenever you might need to activate an accessory on demand.
A few notable features:
-
- Accepts 12-24 Volt input
- Two 30 amp fused circuits w/12-24 Volt output
- Two 10 amp fused circuits w/12-24 Volt output
- Includes 4 wire harnesses with waterproof connectors
- Wireless RF remote rocker switch module with ambient backlight
- Backlit switches when optionally connected to 12 Volt power via an 8′ long, thin 28 gauge harness
- You can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!
- Comes with switch labels too!
- Free 3-year warranty that covers manufacturing defects
Need a longer wire run? Additional TRIGGER Wiring Harnesses are also available, click here to shop.
[button type=”flat” shape=”rounded” size=”regular” href=”https://triggercontroller.com/wp-content/Docs/2100 Trigger 4 Plus User Guide Rev2.pdf” target=”blank”]Click To View The 4 PLUS Installation Quick Start Guide[/button]TRIGGER 4 PLUS Jeep JL Overhead RF Remote Mount
The Trigger JL overhead mounting system is designed for quick and easy “No Tools” installation above the front windshield of a 2018+ Jeep Wrangler. In fact, it allows the Trigger 4 PLUS RF remote assembly to be quickly and easily mounted in one of most easily accessed areas of the Jeep interior. Furthermore, it requires no drilling or screws and is easily removable without causing any damage to the vehicle. The plastic body includes a steel sub-structure that incorporates a clip system for attachment to the vehicle. Includes hardware for mounting your RF remote base.
TRIGGER Jeep JL Underhood Controller Bracket
The Trigger JL underhood mounting system is designed for quick and easy installation in the space between the battery and inner wheel-well sheet metal of a 2018+ Jeep Wrangler. In fact, mount the Trigger controller module in an otherwise unused location under the hood, adjacent to the battery. Furthermore, it requires no drilling and is easily removable without causing any damage to the vehicle. Laser cut aluminum sheet metal for long lasting strength and durability.
Combo Kits also available with our 6 Shooter for Jeep JK and JL:
Please note: Due to Federal regulations surrounding lithium battery cells, any Trigger Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed prior to shipment. For replacement cells please purchase CR2025 for the 4 Plus controller, CR2032 for the 6 Shooter controller…these are readily available at most brick and mortar and online shops.
Related
Additional information
Weight | 7 lbs |
---|---|
Dimensions | 14 × 9 × 4.5 in |
2 reviews for TRIGGER 4 PLUS Wireless Accessory Control System COMBO KIT – Jeep JL+JT
Only logged in customers who have purchased this product may leave a review.
Related products
-
TRIGGER Standard Extension Harnesses
0 out of 5$9.57 Select options This product has multiple variants. The options may be chosen on the product page -
TRIGGER 4 PLUS Remote Replacement
5.00 out of 5$35.97 Read more -
TRIGGER Jeep JK Controller Bracket
5.00 out of 5$24.95 Add to cart -
TRIGGER Jeep JK Fusebox Controller Bracket
0 out of 5$24.95 Add to cart
Will B. (verified owner) –
Mark B. (verified owner) –
Very clean and looks nice up above mirror. The only complaint I have and it’s irritating is that the wireless controller magnets aren’t very strong. When you flip the toggle switches on, the controller comes loose and falls from the bracket. The other thing is the app, it was connected at first and then it wouldn’t connect after a couple of days. Annoying.
Everything else is great though.